set security zones security-zone untrust interfaces host-inbound-traffic system-services ike The following services are required to terminate the VPN. Set security ipsec vpn dyn-vpn ike ipsec-policy ipsec-dyn-vpn-policy Additional Configure System Services Set security ipsec vpn dyn-vpn ike gateway dyn-vpn-local-gw Set security ike gateway dyn-vpn-local-gw xauth access-profile dyn-vpn-access-profile IPSECĭefine the IPSEC VPN set security ipsec policy ipsec-dyn-vpn-policy proposal-set standard Set security ike gateway dyn-vpn-local-gw external-interface Set security ike gateway dyn-vpn-local-gw dynamic ike-user-type shared-ike-id Set security ike gateway dyn-vpn-local-gw dynamic connections-limit 10 Set security ike gateway dyn-vpn-local-gw dynamic hostname dynvpn Set security ike gateway dyn-vpn-local-gw ike-policy ike-dyn-vpn-policy set security ike gateway dyn-vpn-local-gw xauth access-profile dyn-vpn-access-profile The xauth profile determines how to authenticate the user, assign addresses and access parameters. If you are running PPPoE then this should be set to pp0.0. In addition to this we also specify which interface will listen for connections. This IKE-ID is generated using the user-name and group ID (dynvpn). Here we define that each client will have its own IKE-ID. Set security ike policy ike-dyn-vpn-policy proposal-set standardĭefine Preshared Key set security ike policy ike-dyn-vpn-policy pre-shared-key ascii-text Configure Aggressive Mode set security ike policy ike-dyn-vpn-policy mode aggressive
0 Comments
Leave a Reply. |